Schneider Automation Modicon Quantum Ethernet Guide de l'utilisateur télécharger pdf (Page 561)

35013379 02 October 2007 561

Wiring Diagram The following figure shows the wiring diagram for the 140AVO02000 module.

COMMON 1 (-)

MASTER OVERRIDE

COMMON 1 (-)

COMMON 2 (-)

MASTER OVERRIDE

COMMON 2 (-)

COMMON 3 (-)

MASTER OVERRIDE

COMMON 3 (-)

COMMON 4 (-)

MASTER OVERRIDE

COMMON 4 (-)

OUTPUT 1 (+)

OUTPUT 2 (+)

OUTPUT 3 (+)

OUTPUT 4 (+)

The external voltage source

is not required for standard

operation (see NOTE 1).

FOR 0 TO 10 V

FOR 0 TO 5 V

NOTE 1: Master override is an input

connected via an internal relay contact to the

output when the module is not active. If

connected to an external source, the master

override input must be fused by a 1/16 A fuse.

If the master override is not connected to an

external source, then it must be connected to

common of that channel. The master override

relay transition time is typically 2 ms.

NOTE 2: N/C = Not Connected

Normally Open when

CH X green LED is ON

Master Override Relay Circuit (Internal)

This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com

Pas de commentaire

Schneider Automation Modicon Quantum Ethernet Guide de l'utilisateur Page 561